| |
The OMM-3000C can be installed in
many diffrent process enviroments.
For example,the OMM-3000C sensor can
be installed above conveyor belt,a
bar conveyor or a screw co
nveyor,while the PC can be installed
in the control room. The PC can be
up to 1000m away from the sensor .Each
situation is different so during installation,the
OMM-3000C,the sample and the conveyor
must be adjusted accordingly. An example
of this is with the conveyor belt,the
irregularity of the material surface
on the conveyor should be held to
+/-50mm. Instead of PC,the control
unit is connected directly with the
sensor. |
